Product Features
Accepts size 16 contacts (13 amps)
14-20 AWG (2.50-0.50 mm2)
Available in 2, 3, 4, 6, 8 and 12 positions
In-line, flange or PCB mount
Rectangular thermoplastic housing
Mating with integrated latches
Wedge locks secure contacts and enhance retention
Available accessories: Backshells, boots, dust caps, seals, mounting clamps
Material Specifications
Gasket: Silicone
Insert retainer: Thermoplastic
Socket face seal: Silicone
Housing: Thermoplastic
Wedge lock: Thermoplastic
Performance Specifications
DEUTSCH electrical connectors are built to withstand the harsh environmental challenges common to industrial markets that demand advanced performance. Proper parts, procedures and tools must be used.
Temperature: Continuous operating temperature range of -55° C to +125° C at rated current.
Durability: No electrical or mechanical defects after 100 insertions and removals.
Vibration: No unlocking or disengagement and no mechanical or physical damage after 20 G sinusoidal vibrations in each of three perpendicular planes at frequencies from 10 to 2,000 Hz. No electrical discontinuity greater than 1 microsecond.
Physical Shock: No unlocking, disengagement, or other unsatisfactory results during or after 50 G physical shock in each of three perpendicular planes. No electrical discontinuity greater than 1 microsecond. MIL-STD 202, Method 213, Condition “C”.
Fluid Resistance: No damage when exposed to most fluids used in industrial applications.
Insulation Resistance: 1000 megohms minimum (25°C)
Moisture Resistance: No electrical degradation or current leakage when submerged in three feet of water when properly wired and mated. Dielectric Withstanding Voltage: Less than 2 mA leakage at 1500 VAC.
Thermal Cycling: No cracking, peeling or leakage after 20 cycles at -55°C to +125°C.
